MagCAD Wahoo Elemnt Roam V2 Tether

What's Included

1x 3D printed anchor, 1x adjustable lanyard, 1x M2 x 6mm countersunk screw.

The Wahoo Roam V2 is pictured for reference only and not included.

Overview

A tether for the Wahoo Elemnt Roam (V2) computer. Attaches to the recess on the back of your device with the M2 screw (provided). The lanyard can then be secured to your handlebars before each ride, reducing the risk of accidently dropping your device.

This tether is designed specifically for the Roam (V2), new for Oct 2022, featuring a colour screen and raised buttons.

See our MagCAD Wahoo Elemnt Tether - Bolt (V1) and Roam (V1) for the original Bolt (V1) and Roam (V1), which both have black and white screens.

See our MagCAD Wahoo Elemnt Bolt V2 Tether for the Bolt (V2) GPS computer.

Application

Place the Nylon anchor into the recess of your device and secure with the countersunk M2 screw provided. A Pozidrive or cross headed screwdriver should be used to install the screw without overtightening.

Note the first time you install a tether into your Wahoo device the screw will cut a thread into the plastic. Therefore, you should apply some forward pressure at the same time as rotating the screw.

Before each ride loop the lanyard around your handlebars and install the computer onto its mount. The adjuster gives you an alternative way of securing to your bike as well as a way of keeping the cords tidy.

The lanyard is approx. 200mm in total length; long enough to suit the majority of installations without having lots of extra length on display. If you have particularly wide aero handlebars the tether may not be long enough to loop around the bar in the normal way. But it should be possible to attach it to something else like a cable or computer mount as an alternative.

Compatible With:

• Wahoo Elemnt devices; Roam (V2).

Specifications

• Weight: 4 grams (without hardware).