MagCAD Garmin GoPro Easton ICM Mount
What's Included
- 1x 3D printed mount.
- 1x M5x16mm cap screw.
- 1x M5 curved tee nut.
- 1x M5x20mm button head screw.
- 1x M5 dome nut.
The Garmin device and Easton stem pictured are for reference only and not included.
Overview
Mount your Garmin Edge computer in front of your compatible Easton ICM stem with this MagCAD Mount. The Easton ICM stems have a specially designed faceplate and retained nut that provides a secure point to attach a computer mount.
The MagCAD Garmin Easton ICM Mount is designed to suit Garmin Edge devices up to the size of the 840. It wont suit the largest Garmin 1040/1050 devices.
A GoPro lug has been added underneath for maximum flexibility, allowing you to mount additional devices such as cameras and lights underneath your computer without cluttering the rest of your handlebars.
Application
Fitting the MagCAD mount is a simple process. Should you require any further clarification to the below please get in contact.
- Remove the faceplate from your stem.
- Insert the curved tee nut into the back of the faceplate.
- Bolt the mount through the faceplate and into the curved tee nut and loosely tighten. You will need to use a ball end Allen key to tighten the bolt, due to the angle and proximity of the GoPro lug.
- Pivot the mount to the centre of the slot and fully tighten.
- Check the mounting bolt is long enough to fully engage with the tee nut but not too long to protrude past the tee nut and foul your handlebars.
- Reassemble the faceplate to your stem following the stem manufacturers instructions.
- Loosen the mount and pivot to your preferred orientation before retightening.
Please Note: When mounting multiple devices off one mount we recommend using a tether just for extra security.
Compatible With:
- Garmin Edge devices (small/medium): 130 Plus, 540, 840.
- Action cameras and lights with a GoPro type mount.
Specifications
- Weight: 13 grams (without hardware), 23 grams (with hardware).
Disclaimer
This product and/or service is not affiliated with, endorsed by or in any way associated with Easton Cycling, Garmin Ltd, or their products and services. Easton, Garmin and their respective logos are trademarks or registered trademarks of Fox Factory Inc and Garmin Ltd.