MagCAD Garmin Easton ICM Mount
What's Included
- 1x 3D printed mount.
- 1x M5x16mm cap screw.
- 1x M5 curved tee nut.
The Garmin device and Easton stem pictured are for reference only and not included.
Overview
Mount your Garmin Edge computer in front of your compatible Easton ICM stem with this MagCAD Mount. The Easton ICM stems have a specially designed faceplate and retained nut that provides a secure point to attach a computer mount.
Weighing only 10 grams (without hardware) the MagCAD mount is extremely strong and stiff, keeping your device securely positioned in front of your stem.
The MagCAD Garmin Easton ICM Mount is designed to suit Garmin Edge devices up to the size of the 540 and 840. See our MagCAD Garmin 1050 Easton ICM Mount for a longer version to suit the largest Garmin Edge 1050 and 1040 devices.
Application
Fitting the MagCAD mount is a simple process. Should you require any further clarification to the below please get in contact.
- Remove the faceplate from your stem.
- Insert the curved tee nut into the back of the faceplate.
- Bolt the mount through the faceplate and into the curved tee nut and loosely tighten.
- Pivot the mount to the centre of the slot and fully tighten.
- Check the mounting bolt is long enough to fully engage with the tee nut but not too long to protrude past the tee nut and foul your handlebars.
- Reassemble the faceplate to your stem following the stem manufacturers instructions.
- Loosen the mount and pivot to your preferred orientation before retightening.
All Garmin Edge devices come with a lanyard for extra security. We recommend using this lanyard alongside our MagCAD mount to avoid any risk of damage due to incorrect assembly or mis-use.
Compatible With:
- Garmin Edge devices (small/medium): 130 Plus, 540, 840.
Specification
- Weight: 10 grams (without hardware), 17 grams (with hardware).
Disclaimer
This product and/or service is not affiliated with, endorsed by or in any way associated with Easton Cycling, Garmin Ltd, or their products and services. Easton, Garmin and their respective logos are trademarks or registered trademarks of Fox Factory Inc and Garmin Ltd.